Оцените этот текст:


---------------------------------------------------------------
  Origin: http://www.openmail.com/cyc/om/00/showfile.cgi?100-1546
---------------------------------------------------------------

     This document provides  an  overview on  how to  install  and configure
OpenMail on  a HP OmniBook 5700 CTX Laptop running Red Hat Linux 6.1. The HP
Laptop  provides  a  nice demonstration system for  customers, resellers and
other  third  party  OpenMail  providers. Not  only can the  OpenMail server
software  be  demonstrated, but  also popular messaging  clients (e.g.,  the
Netscape IMAP or POP  client,  the OpenMail Web  client,  the OpenMail Linux
GUI) can all be demonstrated from within the same system.

     This  document  can  also  be  used  as  a  guide  for  installing  and
configuring a production OpenMail system using Red Hat 6.1 on  another Intel
based system other than a  laptop. While  it should  be  considered work  in
progress, it does provide the necessary steps for getting an OpenMail system
operational. It will also provide  some tips on configuring the  system that
may  not  have  been  considered  during  initial  install  or configuration
process.Building an OpenMail Linux Demo System on an HP OmniBook 5700 Laptop



     Collect   the  necessary   SOFTWARE  &  DOCUMENTATION  for   system
installation. This will include:

     Required software:

     1. Red Hat Boot Diskette Release 6.1
     2. Red Hat Linux 6.1 Operating System for Intel Computers CD
     3. Red Hat Third Party Server Applications CD  from  the Red Hat  Linux
Applications Library (Server Edition)
     4.  OpenMail  Media Subscription Service Quarterly  Patch  CD, February
2000 (EP1) Patch CD

     Suggested Documentation:

     1.  Performance   and  Sizing  Information  for  OpenMail  Version  6.0
(B.06.00) for Linux [ID: 200-0307]
     2. OpenMail HOWTO - a quickstart configuration guide [ID: 100-1454]
     3. OpenMail and Linux [ID: 100-1333]
     4. Release Notes - OpenMail B.06.00 on Linux (OMNOTES) [ID: 100-1423]
     5. OpenMail Installation Instructions for Linux Systems
     6. OpenMail Technical Reference Guide
     7. OpenMail Motif Client for Linux Technical Guide

     For help on Configuring Linux  on a laptop go to the "Linux on Laptops"
Web Page at:
     http://www.cs.utexas.edu/users/kharker/linux-laptop

     Review the notes for the HP OmniBook 5700CTX at:
     http://www.best.com/~mcrosbie/Linux/Linux.html

     Review the notes for "Linux on HP OmniBook 5700 CT" at:
     http://www.physik.tu-berlin.de/~matzed/5700CT.htm



     Before  you install the Red Hat and  OpenMail, fill  in  the  following
table. It lists information you will need to input  during the  installation
process.




     Physical Memory Installed
     
     
     Internet System Name (hostname)
     
     
     Domain Name
     
     
     IP Address
     
     
     Subnetwork Mask
     
     
     Default Gateway hostname
     
     
     Default Gateway host IP Address
     
     
     DNS Server Name
     
     
     DNS Server IP Address
     
     
     Current LOCAL Date & Time
     
     
     Root Password
     
     

     Note: NIS is not required and not recommended for OpenMail systems.




     1. PCMCIA Ethernet Card  to  be installed in one of the PCMCIA slots in
the HP 5700
     2. Hook the Ethernet Card up to the network
     3.  CDROM  Drive   &  Floppy  Diskette  Drive  both  connected  and
operational on the 5700



     WARNING: this cold  install procedure will  wipe all information on the
hard disk drive of the HP 5700 LapTop

     1. Insert the "RedHat Boot Diskette Release 6.1" in the diskette drive
     2. Turn on the HP 5700 Laptop and boot from the RedHat Boot Diskette
     3. Insert the "RedHat Official  Linux 6.1  Operating  System for  Intel
Computers CD disk 1" in the CDROM drive
     4. Hit "Enter" when the "Welcome to Red Hat Linux 6.1" screen appears
     5.  Select  "English"  when  "Choose  a  Language"  appears  (or  other
preferred language)
     6. Select "Generic 101-key PC" Model, "U.S. English w/ISO9995-3" Layout
and "None"  for Variant when the Keyboard  Configuration screen appears  (or
other preferred keyboard type), select "Next>"
     7.  Select  the  Generic  "2  Button  Mouse  (PS/2)"  when  the  "Mouse
Configuration" screen appears, select "Next>"
     8.  Select "Next>" when the  "RedHat Linux  System Installer" screen
appears
     9. Select "Custom" when the "Install Path" screen appears
     10. When the  "Disk Druid" screen appears, configure the  partitions as
follows:
     Mount Point Device Requested Actual Type
     /boot hda1 24M 27M Linux native
     <swap> hda5 128M 128M Linux swap
     / hda6 1M 2779M Linux native
     Note: the "root" file system (/) was configured to "grow to fill disk".
     11. Select "Next>"
     12.  Select "Next>"  when the  "Choose Partitions to  Format" screen
appears
     13. Select "Next>" when the "LILO Configuration" screen appears
     14. Select a Time Zone and select "Next>"
     15. Enter a root password, confirm and select "Next>"
     16.  Select "Next>" when the "Authentication  Configuration"  screen
appears
     17.  Select  the following packages when the "Package  Group Selection"
appears:

     Printer Support
     X Window System
     Gnome
     KDE
     DOS/Windows Connectivity
     Graphics Manipulation
     Games
     Multimedia Support
     NetworkedWorkstation
     Dialup Workstation
     News Server
     Anonymous FTP Server
     Web Server
     DNS Name Server
     Network Management Workstation
     Development
     Kernel Development
     Extra Documentation
     Utilities

     Note: finally select "Select individual packages"
     Select "Next>" to continue
     18. Select "Next>" when the "Individual Package Selection" appears
     19. Select BOTH "Customize X Configuration" & "Use Graphical Login"
when the X Configuration screen appears, select "Next>"
     20. Select "16 Bits per  Pixel,  640X480" when  the Customize  X Screen
appears, select "Next>"
     21. Select "Next>" to begin the installation
     Note: this  will take some time to install all the software on the hard
disk
     22. Remove the "RedHat Boot Diskette" from the diskette drive
     23. Place a BLANK floppy diskette in the diskette drive
     24. Select "Next>" when the "Bootdisk Creation" screen appears
     25. Select "Next>" when the "Congratulations ..." screen appears
     26. Remove the diskette from the floppy diskette drive
     27. Select "Exit"
     28. The system will reboot
     29. Remove the Linux OS CD from the CDROM

     Note: the X-Windows screen will be a little off at this point. The next
step will help fix that.



     1. Login as "root" into Gnome
     2. Start a terminal window
     3. Edit the /etc/X11/XF86Config File (or copy it from another location)

     See the attached XF86Config File for the changes involved.

     4. Save the XF86Config file and reboot the system.



     1. Login as "root"
     2. Start a terminal window
     3. Run "linuxconf"
     4. Under "Config",  "Networking",  "Client  Tasks", enter  "Basic  Host
Information"

     Under "host name" enter the Host  Name  without the domain  name (e.g.,
hp1)
     Under Adaptor 1, make sure "Enabled" is selected
     Select "Manual" for Config Mode
     Primary Name + domain (e.g. hp1.domain.hp.com)
     Aliases (opt) (e.g., hp1alias)
     IP Address
     Netmask (opt)
     Net device (e.g., eth0)

     5. Accept the changes, select "Act/Changes"
     6. Select "Quit" & reboot the system manually



     The kernel parameters to modify are outlined and can be calculated from
the Linux "OMNOTES" documentation  that is supplied on the OpenMail web site
(http://www.hp.com/go/openmail).  For  the  HP 5700  Laptop,  this  step  is
optional.  It is provided here for completeness and in the event these notes
are being  used for  another type of production  OpenMail system,  this step
will be required.

     Modify the following kernel parameters:





     NR_TASKS
     2048
     NA
     
     File_max
     NA
     NA
     
     Inode_max
     NA
     NA
     

     Save  the  kernel  modifications, recompile the  kernel and  reboot the
system







     Installing & Configuring OpenMail v6.0 & SendMail 8.9.3 on a HP
OmniBook 5700 CTX Laptop





     SendMail   configuration  will  be   very   specific  to  a  customer's
implementation.  OpenMail  installs  the  necessary  OpenMail  rulesets  and
mailers  into the "sendmail.cf" configuration file. However, it does not set
up specific routing, aliases  and  hostname information that may be required
for proper operation.

     The  following files are configuration  files that can be  modified for
SendMail:

     З /etc/sendmail.cf
     З /etc/sendmail.cw
     З /etc/aliases

     Customize these files for your OpenMail Linux Demo environment.

     With  the version of  SendMail  that  is  installed  with  Red Hat  6.1
(v8.9.3), a mailertable can  be created such  that all mail  from a specific
domain can be routed into OpenMail automatically.

     The  initial file "/etc/mailertable" is  a  zero (0) length  file  when
installed.

     To restart SendMail:
     /etc/rc.d/init.d/sendmail stop
     /etc/rc.d/init.d/sendmail start



     1. Login as "root"
     2. Start a terminal window
     3. Insert the "Red Hat Third Party Server Applications" CD
     Note: the CD should mount automatically on /mnt/cdrom
     4. The OpenMail Software is located under "/mnt/cdrom/HP"
     5. Install the OpenMail server software by running:
     rpm -i /mnt/cdrom/HP/openmail-core-eval-6.0-1.i386.rpm
     6. Proceed with the OpenMail Server Software "Core" installation
     7. Install the desired  OpenMail  Languages (American  English  in this
case):
     rpm -i /mnt/cdrom/HP/openmail-lang-American-6.0-1.i386.rpm
     8. Proceed with the OpenMail language installation
     9. Install the OpenMail GUI client software
     rpm -i /mnt/cdrom/HP/openmail-gui-6.0-1.i386.rpm
     10. Proceed with the OpenMail GUI installation
     11. Run "ominstall": /opt/openmail/B.06.00.00/bin/ominstall
     Note: you should check the /tmp/ominstall.log for errors when complete
     12. unmount and remove the CD, type "umount /mnt/cdrom"



     1. Login as "root"
     2. Insert the " OpenMail Media Subscription Service Quarterly Patch CD,
February 2000 (EP1)" CD
     Note: the CD should mount automatically on /mnt/cdrom
     3.    The    OpenMail    server     software     is    located    under
"/mnt/cdrom/SERVER/6.0/LINUX"
     4.  Remove the current OpenMail language installation (American English
in this case):
     rpm -e openmail-lang-American-6.0-1
     5. Remove the current OpenMail core software
     rpm -e openmail-core-6.0-1
     6. Install the OpenMail February 2000 EP1 Patch software by running:
     rpm -i /mnt/cdrom/SERVER/6.0/LINUX/openmail-core-6.0.5-7.i386.rpm
     7.  Install  the desired OpenMail Languages  (American  English in this
case):
     rpm                                                                  -i
/mnt/cdrom/SERVER/6.0/LINUX/openmail-lang-American-6.0.5-7.i386.rpm

     Note: there is  a bug in the OpenMail EP1 (February 2000) patch for the
PAW Web Client profile. The workaround is to:

     З cd /var/opt/openmail/omhtml/PAW-AMERICAN:
     mv diratt.search.std diratt.search
     mv profile.std profile
     З cd /var/opt/openmail/omhtml/PAW-AMERICAN/pers:
     mv PINSTRIPE.std PINSTRIPE
     mv default.std default

     З cd /var/opt/openmail/omhtml/PAW-C:
     mv diratt.search.std diratt.search
     mv profile.std profile
     З cd /var/opt/openmail/omhtml/PAW-C/pers:
     mv PINSTRIPE.std PINSTRIPE
     mv default.std default

     Note:  if you have other languages installed, this will need to be done
for those as well.

     This will be fixed in the next (EP2, May 2000) OpenMail patch release.



     Note:  make  sure that  the  OpenMail binaries are accessible via  your
"PATH" environment variable (export PATH=$PATH:/opt/openmail/bin)


     omrc
     omon -s all
     execute "omstat -a & omstat -s" to verify OpenMail is operational.

     Note:  you  may see the  "Application Link  Server" as  "Aborted"  when
finished with this process. That's ok, ignore this message for now.


     omaddmn -m <primary mailnode name>

     Note:  in  lieu  of a creative name to use for a mailnode name, you can
use the system name for the primary mailnode.


     omadmidp -a -s 1001 -n 11000
     Check the creation of the pool "omadmidp -u -q"


     omaddfb
     Check the creation of the directory by running "omlistdirs -L"


     omaddu  -n "Error Manager/<primary mailnode name>" -c  admin -l C
-p error -F


     omconfenu -n "Error Manager/<primary mailnode name>"


     omaddu  -n  "Admin Manager/<primary mailnode name>" -c admin -l C
-p error -F


     omaddcda -d system -r 60

     Force the first  build  of  the Directory Access  Tables for the SYSTEM
directory:
     omexeccda


     omshowlvl




     Local Delivery
     7
     
     Internet Mail Gateway
     7
     
     Sendmail Interface
     7
     
     Test Server
     7
     
     Administration 
     7
     
     Converters
     7
     
     Browser
     7
     
     Request Server
     7
     
     Print Server
     7
     
     Directory Synchronization
     7
     
     Bulletin Board Server
     7
     
     Directory Relay Server
     7
     
     Background Search Service
     7
     
     Archive Server
     7
     
     CDA Server
     7
     


     omconfaud  router 11 local 11 unix 11 lci 11 rci 11 admin 11 dirsync 11
bbs 11


     omshowaud




     Service Router
     11
     
     Local Delivery
     11
     
     Internet Mail Gateway
     11
     
     Local Client Interface
     11
     
     Remote Client Interface
     11
     
     Administration
     11
     
     Request Server
     0
     
     Directory Synchronization
     11
     
     Bulletin Board Server
     11
     
     Background Search Service
     0
     


     omconfux  -m  internet -s <primary  mailnode>,sh  -u  <primary
mailnode>,uu


     omshowrt -q all
     LOCAL <primary mailnode>
     UNIX internet MIME
     UNIX <primary mailnode>,sh SHAR
     UNIX <primary mailnode>,uu UUENCODE


     Edit /etc/inetd.conf and add the following lines:
     # OpenMail POP3 Service
     pop-3 stream tcp nowait root /opt/openmail/bin/in.pop3d in.pop3d

     Note: the following line should already be in /etc/services
     pop-3 110/tcp # POP Version 3
     Restart inetd:
     /etc/rc.d/init.d/inet stop
     /etc/rc.d/init.d/inet start


     The  OpenMail  IMAP4  daemon  is  automatically started  as one of  the
OpenMail "services".
     Therefore, it is already configured. To view the status, type:
     omstat -a

     Note: the following line should already be in /etc/services
     imap2 143/tcp imap # Interim Mail Access Proto V2

     Edit  /var/opt/openmail/sys/dit.cfg   and  make  the   following  entry
"blank":
     DIT_DIRECTORY=

     Edit  /var/opt/openmail/sys/slapd.conf and make sure these are the only
lines in the file:
     database om
     suffix ""
     flatSuffix "ou=<primary mailnode>"
     directory SYSTEM
     sizelimit 100
     timelimit 15
     useDit false

     Restart the OpenMail LDAP daemon (slapd):
     omoff -d 0 -a slapd
     omon -a slapd


     BRW_NAME_MAPPING=TRUEUAL_POP3_HOSTNAME=<primary mailnode>
     UAL_SIGNON_ALIAS=YESUAL_SIGNON_ALIAS_CONFIG=SYSUAL_USE_SIGNON_ALIAS=FALSEUXI_NAME_MAPPING=TRUEUXO_NAME_MAPPING=TRUECDA_CHECKTIME=60CDA_USE_CHANGE_LOG=TRUEUAL_SIZE_ERR_TO_USER
     UAL_SIZE_MSG_TO_ENU
     UAL_SIZE_MSG_TO_USER
     SE_DEFAULT_DELAY=86400
     IMAP_CONNECTION_LIMIT=500
     IMAP_CONNRATE_LIMIT=3
     IMAP_IDLE_TIMEOUT=31
     IM_MAKE_MSG_ID_GLOBAL_UNIQUE=FALSE
     UAL_SINGLE_TEMP_DIR=/var/opt/openmail/temp


     Obtain the  "Password Certificate" from  the appropriate  source (check
http://www.hp.com/go/openmail for more detail).
     Edit the "/var/opt/ifor/nodelock" file
     Enter the "passwords" for:

     1. B2016BZ (OpenMail Mailbox License)
     2. B2020BZ (OpenMail HP Client License)
     3. B2269BZ (OpenMail Japanese GUI Driver License)
     4. B2274BZ (OpenMail cc:Mail R6 Driver License)
     5. B2275BZ (OpenMail Outlook Driver License)
     6. B2264BZ (OpenMail HP Mobile Client License)

     Note: this sets up the "nodelock" file for licensing.
     Once complete, verify license installation by running "omshowlic -v".

     Note:  for Linux the directory "/var/opt/ifor"  may  not exist and  may
need to be created.


     omshut
     omdisksprd  0   /var/opt/openmail/data1  1   /var/opt/openmail/data2  1
/var/opt/openmail/data3 1  /var/opt/openmail/data4 1 /var/opt/openmail/data5
1 /var/opt/openmail/data6 1

     Note: for this demo system, this step can be skipped.


     Password controls are flexible and as such can be set up  in any manner
that fits the  business  need.  For each OpenMail toaster, this is  what  is
recommended:

     Expiration
     180 days
     
     Minimum Length
     5 characters
     
     Options
     must contain at least one alphanumeric and one numeric character
     
     Illegal Tries
     5
     

     omconfpwd -e 180 -l 5 -c an -k 5

     Check the controls by running:
     omshowpwd

     Note: for this demo system, this step can be skipped.


     Set the Message Store Limits for the Demo System. This system has about
1.5gb  of usable message store space. With  10 users, this  equates to 150mb
per user.  So, for each  user  it is  recommended that you allow for 50mb of
In-Tray space and 100mb of File Cabinet space. Run the following command:

     omlimit -g -i 50 -f 100

     Note: for this demo system, this step can be skipped.


     First, shutdown the processes that will need to be updated: "omoff -d 0
-s rtr local sendmail unix"

     Now run:
     omsetsvc -x router 20
     omsetsvc -x local 20
     omsetsvc -x sendmail 20
     omsetsvc -x unix 20

     Now, turn the processes back on: "omon -s rtr local sendmail unix"

     Note: for this demo system, this step can be skipped.


     The Item Structure Server  Process is installed and running by default.
Change the startup flag on the ISS service by running:

     omsetsvc -a iss n

     This  will insure the Item  Structure Server process  is not started by
default, but is  still  available  if needed. It  will  also  be viewable by
omstat and remain in the "stopped" state while OpenMail is in operation.


     The  Application  Link  Server  Process  is installed  and  running  by
default. Although, at first start,  it  may be  in an "aborted" state. Check
the status by running: omstat -s. Change the startup flag on the Application
Link Server service by running:

     omsetsvc -a "Application Link Server" n

     This will insure the Application Link Server  process is not started by
default, but is still  available  if needed. It will  also  be  viewable  by
omstat and remain in the "stopped" state while OpenMail is in operation.


     At this point in the  configuration process, it's  time  to restart all
processes.
     Type: "omshut" to shutdown all of OpenMail.
     Once complete, type: "omrc" to start it all back up again.


     Red Hat Linux  6.1  has an Apache Web server installed  as part  of the
initial install process. It will  need to be configured so that the OpenMail
Web Clients can access OpenMail.

     The main directories & files for the Apache Server are:
     /var/log/httpd
     /home/httpd
     /usr/sbin/httpd
     /var/cache/httpd
     /var/lock/subsys/httpd
     /var/run/httpd.pid
     /etc/rc.d/init.d/httpd
     /etc/httpd

     Change directory to "/home/httpd/cgi-bin" (cd /home/httpd/cgi-bin)  and
add the following links:
     З ln -s /opt/openmail/bin/ice.cgi ice.cgi
     З ln -s /opt/openmail/bin/omhtml.cgi omhtml.cgi
     З ln -s /opt/openmail/bin/select.cgi select.cgi
     З ln -s /opt/openmail/bin/webselect.cgi webselect.cgi

     Change directory to  "/home/httpd/html"  (cd /home/httpd/html) and  add
the following link:
     З ln -s /var/opt/openmail/omhtml omhtml

     Change  directory to  "/etc/httpd/conf"  (cd /etc/httpd/conf) and  edit
"access.conf"
     Change this section of the config file to look like this:

     <Directory /home/httpd/cgi-bin>
     AllowOverride None
     Options ExecCGI Indexes Includes FollowSymLinks
     </Directory>

     Restart the Web Server:
     To stop the Apache Web server:
     /etc/rc.d/init.d/httpd stop

     To start the Apache Web server:
     /etc/rc.d/init.d/httpd start

     To access  the  different  OpenMail Web  Client  Profiles,  point  your
browser to the following urls:

     http://<yourdemoservername>/cgi-bin/ice.cgi ->  OpenMail  v6.0
Web Client
     http://<yourdemoservername>/cgi-bin/omhtml.cgi   ->   OpenMail
v5.x Web Client
     http://<yourdemoservername>/cgi-bin/ice.cgi/prof=PAW-C      ->
OpenMail v6.0 Personal Administration Wizard (PAW)

     or

     http://<yourdemoservername>/cgi-bin/webselect.cgi -> to access
the web profile selector.

     Add OpenMail Users & their respective Internet-Addr (attribute 167)
information
     Demo  users and accounts must  be installed on the system prior  to the
demo box use. Use the "omaddu" utility to add users to the system.

     In addition, the internet address associated with this OpenMail account
must be added separately. This is the internet address that this person will
send/receive mail  as.  To do  this,  use the "ommodent" utility to modify a
users directory entry.


     The OpenMail Linux Demo box is ready for use. Review any of  the client
installation documentation from the main OpenMail  web site to determine how
and which clients you would like to connect to OpenMail.



     Note: these steps can be skipped for the  OpenMail Linux demo box. They
are documented here to use as a guideline for other "non-demo" systems.

     This next section  is to be  used as a guide to help with  "day-to-day"
operations. No one  organization  has  a "standard" way of  operating  their
messaging environment. This is  to be used  as a guide to help determine the
processes and functions to execute the tasks necessary to  keep OpenMail  in
good working order. It is a guide only and may not be all-inclusive.


     Some of  the  tasks  necessary to monitor the health  of  the  OpenMail
system include:
     1. Check all services are running
     2. Check Error Manager
     3. Check Message Movement
     4. Check Error Queues (e.g., SMERR)
     5. Check for System Messages
     6. Disk Usage
     7. omscan
     8. Directory (omexeccda)


     Some standard scripts that would help would be to:
     1. A script to run omtidyallu to clean up the waste can area
     2. A script to age the OpenMail & Sendmail logs
     3. A script to run omscan
     4. A script to do backups automatically (see the "Backups" section)
     5. A script to check OpenMail process health
     6. A script to check queues
     7. A script to check disk space utilization
     8. A script to check the error queues
     9. A script to modify the SendMail alias file if necessary


     This system is designed with  disk mirroring. The system can be  backed
up in one of three ways:
     1. online, without shutting down OpenMail
     2. offline, shutdown OpenMail
     3. online, by splitting mirrors
     Number three (#3) above is recommended for this system.


     OpenMail modifies the SendMail  configuration file by default to add in
the OpenMail mailers. However, it does not make the necessary  modifications
for SendMail to run in  your  specific environment. In  fact, it  is assumed
that the network infrastructure and any  SendMail configuration necessary is
completed  before  OpenMail  is  installed.  OpenMail  uses  SendMail  as  a
transport  mechanism only and does not check  to  make sure it is in working
order.

     At a minimum, you will need to add any network routes (using the "route
add"  command) to add network routes to  other mail systems,  gateways,  DNS
servers, NIS servers,  Web servers, etc.  Also, you can make  changes to the
"/etc/nsswitch.conf" as needed.


     Trend  Micro's  "ScanMail"  product for OpenMail can be integrated with
the OpenMail system to perform virus scanning.

     http://www.antivirus.com


     Create and edit the message delivery ruleset file:

     "vi /var/opt/openmail/rules/off-peak"

     and enter the following rule filters into the file:


















     Change the ownership of the file:
     "chown openmail:hpoffice /var/opt/openmail/rules/off-peak"

     Modify the route(s) to add the message delivery ruleset:
     "ommodrt -m <primary mailnode> -d off-peak"

     Note: the other routes should modified as well.

     Check that the rulesets are in place:
     "omshowrt -q all -d"

     Restart the service router:
     "omoff -d 0 -s rtr"
     "omon -s rtr"


     There are a couple  of tools  in the contributed library that  can help
set  up or delete users  in batches. Also, the  Admin  Manager tool can help
with adding/modifying/deleting users.


     One  of  the tools  in  the contributed library  will set  up  a Public
Distribution List (PDL) for all local users on the  box.  At a minimum, this
script (or one similar) should be installed.


     If  there  are other  OpenMail or  Microsoft  Exchange  systems in  the
network,  then  directory  synchronization can  be  set  up using OpenMail's
dirsync commands.


     Request Server scripts can be added for anything. Examples include:

     1. A script to add/modify/delete a PDL
     2. A script to report on output from an omscan run
     3. A script to change a password for a user

     These  are several examples, but anything that would help  the  user or
administration can be developed.


     Any public or private BB's need to be set up.


     There are a number of third party products that can help with Operating
your OpenMail system. They include:

     OpenTime Calendaring: http://www.cst.ca
     OpenScope InfoDirect: http://www.openscope.com
     Openview: http://www.hp.com/go/openview
     Trend Micro ScanMail: http://www.antivirus.com
     Entrust PKI: http://www.entrust.com
     Virtual Vault (OpenMail AnyWhere): http://www.hp.com/go/security
     Spark 2000 OMVI: http://www.spark2000.com
     Automated Profile Management's Profile Maker: http://www.autoprof.com

     Check out others on document 100-1156 at http://www.hp.com/go/openmail



     # File generated by XConfigurator.

     #
**********************************************************************
     # Refer to the XF86Config(4/5) man page for details about the format of
     # this file.
     #
**********************************************************************

     #
**********************************************************************
     # Files section. This allows default font and rgb paths to be set
     #
**********************************************************************

     Section "Files"

     # The location of the RGB database. Note, this is the name of the
     # file minus the extension (like ".txt" or ".db"). There is normally
     # no need to change the default.

     RgbPath "/usr/X11R6/lib/X11/rgb"

     #  Multiple  FontPath  entries  are  allowed  (they  are   concatenated
together)
     # By default, Red Hat 6.0 and later now use  a font  server independent
of
     # the X server to render fonts.

     FontPath "unix/:-1"

     EndSection

     #
**********************************************************************
     # Server flags section.
     #
**********************************************************************

     Section "ServerFlags"

     # Uncomment this to cause a core dump at the spot where a signal is
     # received. This may leave the console in an unusable state, but may
     # provide a better stack trace in the core dump to aid in debugging
     #NoTrapSignals

     #  Uncomment  this  to  disable  the  <Crtl><Alt><BS>
server abort sequence
     # This allows clients to receive this key event.
     #DontZap

     #         Uncomment         this         to         disable         the
<Crtl><Alt><KP_+>/<KP_-> mode switching
     # sequences. This allows clients to receive these key events.
     #DontZoom

     EndSection

     #
**********************************************************************
     # Input devices
     #
**********************************************************************

     #
**********************************************************************
     # Keyboard section
     #
**********************************************************************

     Section "Keyboard"

     Protocol "Standard"

     # when using XQUEUE, comment out the above line, and uncomment the
     # following line
     #Protocol "Xqueue"

     AutoRepeat 500 5

     # Let the server do the NumLock processing. This should only be
     # required when using pre-R6 clients
     #ServerNumLock

     # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
     #Xleds 1 2 3

     #To set the LeftAlt to Meta, RightAlt key to ModeShift,
     #RightCtl key to Compose, and ScrollLock key to ModeLock:

     # LeftAlt Meta
     # RightAlt Meta
     # ScrollLock Compose
     # RightCtl Control

     # To disable the XKEYBOARD extension, uncomment XkbDisable.

     # XkbDisable

     # To customise the XKB settings to suit your keyboard, modify the
     # lines below (which are the defaults). For example, for a non-U.S.
     # keyboard, you will probably want to use:
     # XkbModel "pc102"
     # If you have a US Microsoft Natural keyboard, you can use:
     # XkbModel "microsoft"
     #
     # Then to change the language, change the Layout setting.
     # For example, a german layout can be obtained with:
     # XkbLayout "de"
     # or:
     # XkbLayout "de"
     # XkbVariant "nodeadkeys"
     #
     # If you'd like to switch the positions of your capslock and
     # control keys, use:
     # XkbOptions "ctrl:swapcaps"

     # These are the default XKB settings for XFree86
     # XkbRules "xfree86"
     # XkbModel "pc101"
     # XkbLayout "us"
     # XkbVariant ""
     # XkbOptions ""

     XkbKeycodes "xfree86"
     XkbTypes "default"
     XkbCompat "default"
     XkbSymbols "us(pc101)"
     XkbGeometry "pc"
     XkbRules "xfree86"
     XkbModel "pc101"
     XkbLayout "us"
     EndSection

     #
**********************************************************************
     # Pointer section
     #
**********************************************************************

     Section "Pointer"
     Protocol "PS/2"
     Device "/dev/mouse"

     # When using XQUEUE, comment out the above two lines, and uncomment
     # the following line.

     # Protocol "Xqueue"

     # Baudrate and SampleRate are only for some Logitech mice

     # BaudRate 9600
     # SampleRate 150

     # Emulate3Buttons is an option for 2-button Microsoft mice
     # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

     Emulate3Buttons
     Emulate3Timeout 50

     # ChordMiddle is an option for some 3-button Logitech mice

     # ChordMiddle

     EndSection


     #
**********************************************************************
     # Monitor section
     #
**********************************************************************

     # Any number of monitor sections may be present

     Section "Monitor"

     Identifier "My Monitor"
     VendorName "Unknown"
     ModelName "Unknown"

     # HorizSync is in kHz unless units are specified.
     # HorizSync may be a comma separated list of discrete values, or a
     # comma separated list of ranges of values.
     # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
     # USER MANUAL FOR THE CORRECT NUMBERS.

     HorizSync 24 - 80

     # VertRefresh is in Hz unless units are specified.
     # VertRefresh may be a comma separated list of discrete values, or a
     # comma separated list of ranges of values.
     # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
     # USER MANUAL FOR THE CORRECT NUMBERS.

     VertRefresh 39-90

     # Modes can be specified in two formats. A compact one-line format, or
     # a multi-line format.

     # These two are equivalent

     # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

     # Mode "1024x768i"
     # DotClock 45
     # HTimings 1024 1048 1208 1264
     # VTimings 768 776 784 817
     # Flags "Interlace"
     # EndMode

     # This is a set of standard mode timings. Modes that are out of monitor
spec
     # are automatically deleted by the server (provided the HorizSync and
     # VertRefresh lines are correct), so there's no immediate need to
     # delete  mode  timings  (unless particular mode timings  don't work on
your
     # monitor). With these modes, the best standard mode that your monitor
     # and video card can support for a given resolution is automatically
     # used.

     ModeLine "800x600@8bpp" 36 800 824 896 1024 600 601 603 625
     Modeline "800x600@16bpp" 40 800 824 896 1024 600 601 603 625
     Modeline "800x600@24bpp" 40 800 824 896 1024 600 601 603 625

     EndSection


     #
**********************************************************************
     # Graphics device section
     #
**********************************************************************

     # Any number of graphics device sections may be present

     Section "Device"
     Identifier "Generic VGA"
     VendorName "Unknown"
     BoardName "Unknown"
     Chipset "generic"

     # VideoRam 256

     # Clocks 25.2 28.3

     EndSection

     # Device configured by Xconfigurator:

     Section "Device"
     Identifier "Chips & Technologies CT65545"
     VendorName "Unknown"
     BoardName "Unknown"
     VideoRam 2048
     # Option "noaccel"
     # Option "no_bitblt"
     # Option "xaa_no_color_exp"
     # Option "xaa_benchmark"
     # Option "hw_cursor"
     # Option "sync_on_green"
     # Option "fast_dram"
     # Option "use_vclk1"
     # Textclockfreq 25.175
     # Option "nolinear"
     # MemBase 0x03b00000
     # Device section for C&T cards.
     # Option "suspend_hack"
     # Option "STN"
     # Option "no_stretch"
     # Option "no_center"
     # Option "use_modeline"
     # Option "fix_panel_size"
     # videoram 512
     # Insert Clocks lines here if appropriate
     EndSection


     #
**********************************************************************
     # Screen sections
     #
**********************************************************************

     # The Colour SVGA server

     Section "Screen"
     Driver "svga"
     # Use Device "Generic VGA" for Standard VGA 320x200x256
     #Device "Generic VGA"
     Device "Chips & Technologies CT65545"
     Monitor "My Monitor"
     DefaultColorDepth 16
     Subsection "Display"
     Depth 8
     # Omit the Modes line for the "Generic VGA" device
     Modes "800x600@8bpp"
     ViewPort 0 0
     Virtual 0 0
     EndSubsection
     Subsection "Display"
     Depth 16
     # Omit the Modes line for the "Generic VGA" device
     Modes "800x600@16bpp"
     ViewPort 0 0
     Virtual 0 0
     EndSubsection
     Subsection "Display"
     Depth 24
     # Omit the Modes line for the "Generic VGA" device
     Modes "800x600@24bpp"
     ViewPort 0 0
     Virtual 0 0
     EndSubsection
     EndSection

     # The 16-Color VGA Server

     Section "Screen"
     Driver "vga16"
     Device "Generic VGA"
     Monitor "My Monitor"
     Subsection "Display"
     Modes "640x480" "800x600"
     ViewPort 0 0
     Virtual 0 0
     EndSubsection
     EndSection

     # The Mono server

     Section "Screen"
     Driver "vga2"
     Device "Generic VGA"
     Monitor "My Monitor"
     Subsection "Display"
     Modes "640x480" "800x600"
     ViewPort 0 0
     Virtual 0 0
     EndSubsection
     EndSection

     #  The accelerated  servers (S3, Mach32, Mach8, 8514, P9000, AGX,  W32,
Mach64
     # I128, and S3V)
     Section "Screen"
     Driver "accel"
     Device "Chips & Technologies CT65545"
     Monitor "My Monitor"
     Subsection "Display"
     Depth 8
     Modes "640x480" "800x600" "1024x768" "1280x1024"
     ViewPort 0 0
     EndSubsection
     Subsection "Display"
     Depth 16
     Modes "800x600" "640x480" "640x400"
     ViewPort 0 0
     EndSubsection
     Subsection "Display"
     Depth 24
     Modes "640x480" "800x600"
     ViewPort 0 0
     EndSubsection
     Subsection "Display"
     Depth 32
     Modes "640x480" "800x600"
     ViewPort 0 0
     EndSubsection
     EndSection




Last-modified: Tue, 30 Jul 2002 18:12:02 GMT
Оцените этот текст: