Ocenite etot tekst:

        (Kompilyaciiya iz dokumentacii modemov ZyXEL 1496*, GVC-1440)

AT&F0           Factory setting
                Ili na ZyXEL vklyuchit' modem s nazhatoj knopkoj
                Enter ili Data/Voice

ATZ0            Zagruzit' profile 0
AT&V            Raspechatat' setup
AT&W0           Sohranit' setup v profile 0
AT&Y0           Pri vklyuchenii zagruzhat' profile 0

ATE0            Vyklyuchit' eho

atdpTELEFONNYJ NOMER       Pul'sovyj nabor nomera

+++             Vyjti   iz connect'a v komandnyj rezhim
ATO             Vernut'sya iz komandnogo rezhima v CONNECT
ATH             Polozhit' trubku

ATA             Podnyat' trubku  i otvetit' na zvonok
ATS0=2          Snimat' trubku posle 2-go zvonka




AT&P1           Make / break 33/67 (Europe)

ATQ0            Vozvrashchat' kod vozvrata
ATV1            Kod vozvrata tekstovyj



AT&L1           V rezhim vydelennyh linij
AT\N5           Zapretit' soedinenie BEZ szhatiya MNP5 ili V42bis
ATB6            Postavit' skorost' 2400 i nizhe
ATL0            Samyj tihij zvuk
ATM0            Speaker always off



B_      B1 Bell mode                (*)
        B2 Autoscan mode

D_      R originate call in answer mode
        W whait for second dialtone
        , pause
        @ wait for 5 seconds silence
        ! flash
        ; return to command mode after dialing

H       1 make busy

I [0-4] info

L       2 medium speacker

M       0 internal speacker off
        1 internal speacker on until carrier
        2
        3

O       0 return to data mode
        1 return to data mode and initiate equaliser retrain

Registry

s0 autoanswer ring          0
s1 ring counter             0
s2 Escape code character    +
s3 CR character             13
s4 LF character             10
s5 BS character             8

S6 dial tone whait time      2 sec
S7 remote carrier whait time 45 sec
s8 comma pause time           2 sec
s9 carrier dettect responce time 6  *1/10 sec
s10 carrier loss time         14   *1/10 sec
s11 touch tone dialing speed  95   ms
s12 esc character detect time 50   1/50 sec

s14 bitmap

s16 bitmap

s18 modem test timer          0
s21 bitmap
s22 bitmap
s23 bitmap

s25 DTR delay             5 sec
s26 RTS to CTS delay interval     1   *1/100 sec
s27 bitmap
s28 bitmap

Last-modified: Fri, 27 Oct 1995 12:43:50 GMT
Ocenite etot tekst: